Furniture

Manufactured from reclaimed pine boards that have been lightly sanded stained and waxed so they retain their character surrounding reclaimed glass wall blocks mounted onto contemporary purpose made steel legs finished in a vibrant orange, 96cm(w) x 48.5cm(d) x 39cm(h)

Manufactured from reclaimed pine boards that have been lightly sanded stained and then waxed so they retain their character surrounding reclaimed glass wall blocks mounted onto contemporary steel legs finished in a vibrant green, 72.5cm(w) x 48.5cm(d) x 39cm(h)

Made from reclaimed scaffold boards that have been lightly sanded so they retain their character from their previous life then stained and waxed and all supported on iron pipework and fittings,172cm to top shelf x 70cm(w) x 22cm(d)

Created from an old pine log that has had all the bark and rot removed sanded and a wax finish applied mounted onto a bespoke iron base frame with bespoke iron hooks at the top standing 176cmhigh

Made from a reclaimed old brake disc there is a pair of book ends that have the faces of the steel plate covered in felt and a pair of shelf brackets and the shelf it's self made from a reclaimed old scaffold board that is finished with black chalk paint & waxed to give a distressed finish 

Created from reclaimed pallet wood and scaffold boards that have a character that is totally original the cabinet can hold 40 bottles, the inside has been finished in a vibrant green that has been lightly sanded and waxed that contrast with the dark grey bottle supports, the outside being stained dark oak then lacquered and waxed with its wire mesh door and hair pin legs this is a unique unit that is a cross between rustic and industrial, 130cm(h) x 57cm(w) x 37cm(d)

Using an old pallet to created this coffee table we have then painted it with dark grey chalk paint applied the JD logo lightly sanded it and waxed it to give it the aged distressed look then supported it on bespoke legs created from reclaimed galvanized tube, ideal for in the home a bar or restaurant, 91cm(w) x 65cm(d) x 37cm(h)

A pair of rustic bedside tables created from reclaimed old scaffold boards lightly sanded stained and waxed so as to retain the character of their previous life on to which has been mounted old tilly lanterns that have been fitted with GU10 LED bulbs and wired to a rustic switch and fitted with a plug so no wiring to do.

Made from reclaimed old scaffold boards that have been lightly sanded stained and waxed so as to retain the character of their previous life then supported on old scaffold pole with bungs in the bottom so to protect any floor it may be used on giving it the perfect industrial/rustic look, 80cm(w) x 51cm(d) x 35cm(h)

Made from reclaimed roof rafters that have been sanded to remove the bulk of the rough surface and splinter but still retain their character and finger jointed corners to give a modern design feel, this has been stained a light oak colour then waxed, 45cm(w) x 36cm(d) x 37.5cm(h)  

Utilising  four old car springs that have been stripped fitted with a fixing at the top and adjustable padded feet at the base, the top is made from reclaimed old roof rafters that have been sanded and finished with a blue chalk paint sanded and waxed to give the distressed look. This would look good in the home, office or showroom, 88cm(w) x 53cm(d) x 37cm(h)  

Made from reclaimed old scaffold boards that have been lightly sanded then stained and waxed to retain their character from their previous life mounted onto a plywood back board and fitted with a reclaimed mirror, with fittings on the back to enable this to be mounted on the wall, 140cm(h) x 56cm(w)

Created from an old cable drum that has been sanded  to remove any rough edges or splinters that has then been stained light oak and waxed, the ribs and a new top have been made from pallet wood the ribs being chalk painted and waxed dark grey give this table the feel of a ships capstan. 60cm diameter x 44cm(h)

Created from three old camshafts that have been cleaned and painted bright red leaving the cam lobes in their polished finish  and fitted with clear rubber floor protectors to cushsion and protect any fllor it is placed on, the top is from a reclaimed scaffold board cleaned of all the old loose material from it's previous life lightly sanded then painted black and sanded back to give it a worn finish then a laquered and waxed finish applied

This coffee table has been created from a pair of reclaimed industrial lamp shades that have been cleaned and repainted with vibrant rainbow colours in the upper side, the outsides are finished in a satin black, adjustable feet are fitted to the underside with a rubber cover over the top edge to protect the glass and to stop it sliding about, standing 34cm high and 60cm diameter x 6mm toughened glass top, this retro style table is perfect for any room around the home or office.

Created from salvaged parts from a restoration project, the centre reflector has been restored to give an even appearance where as the indicator lens are copies, the drawer is fully lined in faux leather and illuminates the lights in the indicators when opened finished with a solid Ash hardwood top and standing on hairpin legs and hook plates to the rear to hold it to the wall. Perfect for any motoring enthusiast.

Created from a scrap crankshaft and flywheel from a Honda Civic diesel engine that has been cleaned and finished in the Gulf racing colours with a 6mm toughened glass top bonded top a bespoke plate welded to the crank bolt together with adjustable feet fitted to the flywheel so as to protect any floor it may been place on, stands at the perfect height for when you are sat in your favourite arm chair. 

Created from two reclaimed industrial light shades that have been cleaned and fitted top to top and hand painted with the Martini racing colours with random race numbers on a white acrylic disk in the centre, a rubber gasket around the top edge helps protect the toughened glass top and stops it from sliding about, underneath there is a wooden support with adjustable feet that gives it some support and stability. Perfect coffee table height for the motoring/racing enthusiast. 

Created from an old Datsun 240z crankshaft and flywheel that has been clean up and painted, fitted with a black and gold pierced shade and fitted with an LED bulb and 2m of silver braided cable perfect for the enthusiast or just something a bit different. There are rubber buffer on the base so as to protect any floor it may be placed on.

Two old wooden woodworking planes that we have turned into wall lights with ES pull cord lamp holders complete with LED bulbs and shades, the large one is an old jack plane with the small one being an old smoothing plane. These will need to be installed by a qualified electrician or competent person.

Made from two reclaimed pine boards separated with rusty chain giving that barn feel and fitted with 5No unequal but symmetrical pendants hanging on red braided cable and fitted with glass jam jar shades and LED bulbs, 101cm(w) 85cm(h). This will need installing by a qualified electrician or competent person.

Created using a weathered oak branch that has been lightly sanded and waxed that shows off it's character, wrapped with red braided cable the vintage LED bulbs hang unequal but symmetrically in antique brass fittings, fitted with two squirrel bulbs and two large globe bulbs hanging from rusty chain mounted to a central ceiling rose. This will need installing by a qualified electrician or competent person.

Created from an old coil spring mounted on to a reclaimed wheel hub all mounted on to a turned hardwood base and fitted with 2m of silver braided cable and fitted with an LED tube bulb.

Made from a part of an old weathered oak branch that has been sanded and waxed mounted n to a white stone base fitted with a black shade and 2m of purple braided cable and LED bulb.

Created from an old Bialladin paraffin heater the aim was to keep as much of the original heater as possible so only the burner was removed and replaced with the lamp holder, fitted with a vintage tube bulb when on it gives the effect reminiscent of the original heater with silver braided cable a truly retro/vintage lamp.

Using the scrap exhaust manifold from an early Austin Healey 100/6 to create a unique desk/table lamp, bolted together and mounted on to some gears and a wooden base the bulbs are mounted into the exhaust end of the manifolds a flange plate is then trapping a fluorescent orange gasket that illuminate when the light is in use. Fitted with decorative LED bulbs and 2m purple braided cable.

Created from part of an old weathered oak branch with it's splits and cracks giving a unique appearance  and texture mounted on to a natural stone base and fitted with a vintage globe bulb gives perfect ambient lighting for the home environment.

Using a reclaimed scaffold board fitted with an iron bracket with an old pulley wheel attached with a bespoke iron cleat hook, the green braided cable has a plug fitted so installation is straight forward complete with vintage enamelled green shade and decorative LED squirrel bulb, perfect for over the kitchen  table or breakfast bar.

Created from an old chrome car bumper that has been fitted with four golf ball LED bulbs the whole fitting is then suspended on wire rope from a bespoke ceiling rose, it has a modern look but with that retro/industrial feel and would work well in the office or kitchen.

Created from the end plates off VW drive shaft tubes mounted on to an old brake disc that has had the venting high lighted in a vibrant green, the plates being separated by distressed copper tubing finished with a large  vintage LED globe bulb. A bit of industrial lighting with a hint of steampunk.

Made from an old bicycle pump  that has been waxed so as to high light it's patina mounted on to a old pine board the bulb looping over the top from the tube that would have been used to inflate the tyres, fitted with a decorative LED squirrel bulb a perfect nostalgic light for the cycling enthusiast. 

Created from the big end bearing caps from a Datsun 240z engine then supported on polished copper tube all mounted on to a gear and a wheel bearing on to a turned walnut base then fitted with a decorative LED tube bulb.

Made from an weathered oak branch that has been sanded and waxed to bring out the beauty and character of the wood mounted on to a rustic oak base board and fitted with a large contemporary grey lamp shade this will look at home in any setting, complete with 2m of green braided cable and LED candle bulb.

Using an old front drive shaft that has been dismantled into it's various component parts that are then supported with copper tube, the CV housings have been fitted with G9 LED bulbs and 2m of red braided cable, ideal as a desk light or side light for that industrial steampunk look

Using part of a weathered oak branch that has been sanded and waxed bringing out the raw natural beauty of the wood mounted on to a Wenge base and fitted with a black shade gives this a contempory feel giving off a nice ambient light.

Created using a large weathered oak branch with large splits and cracks that make these types of light truly unique it has been sanded and waxed giving it a tactile feel with a piece of reclaimed copper tube mounted in the top for the fittings and topped of with a  with a contempory shade and all mounted on to an old brake disc which makes a perfect weighted base, standing approximatley 180cm high to the top of the shade perfect as a reading light or just for ambient light

Created from two old Austin 7 inch headlamp bowls that have been clean and painted white internally and a natural rope bonded to the outside and clipped in place with copper around the edges then all mounted onto reclaimed copper pipe and a purpose made turned wooden ceiling rose, with a drop of 38cm and a width of 76cm this would work well over any breakfast bar or island unit or office desk.

Using three old barrel hoops reclaimed from a garden planter that have had all the loose rust and old paint removed then welded together to create a globe, with one inner surface finished in a fluorescent green and all the other raw surfaces given a coat of black patanation wax all hanging from a rusty chain in keeping with the look, with a drop of 90cm and a width of 47cm would look great in a conservatory or over a stair well or any room if you have the height

Using an old clutch pressure plate that has been clean up to a bright silver finish mounted onto an old lathe pulley wheel using steel tube and is fitted with an LED party bulb and turquoise braided cable  this light is perfect for when you just need to sit and relax with the ambient dappled light it gives off

Using off cuts of meter rulers from a local joinery manufacturer mounted onto plywood hoops that have been painted in fluorescent colours fitted with an orange lamp holder and fluorescent green braided cable and ceiling rose complete with LED globe bulb, a unique light fitting for the home. Total drop 102cm can be shortened if required.

Created using an old Oak branch that is full of splits and cracks that has had all the moss rot and dirt cleaned off then lightly sanded and waxed to bring out the beauty of the wood, mounted onto an old brake disc that was cleaned and painted green to match the braided cable  that makes a perfect weighted base for this lamp, at the top we have reclaimed copper pipe fitted with a switched light fitting and a plush velvet green shade complete with LED GLS bulb and standing 188cm high.

Created from an old Austin Healey rocker cover mounted on to an old oil pipe all mounted on a gear wheel sitting on a walnut base, fitted with a LED fluorescent tube light on a polished stainless steel baffle, ideal as a desk light or ambient lighting for the home, office or showroom.

Created from old reclaimed machine chain welded into a semi-circles mounted onto various old engine parts giving a claw like structure and fitted with a decorative globe bulb that give a striking night time effect. Perfect for any room in the house.

Created from a piece of old skip chain that has been welded together and cleaned of all the loose material and rust but treated to keep it's patina and mounted onto a hardwood base, the shade is from a reclaimed old vent cover that had all the rotten mesh removed. 

Created using reclaimed off cuts of one metre rulers from a local joinery manufacturer that have been arrange as a shade around the centre section of a old wine bottle mounted on to a turned wooden base, complete with  braided cable and decorative LED tube bulb that will give an ambient light to any room.

Created from off cuts of metre ruler an old engine water pump and the top of a spray can give this light it's uniqueness, finished in bright yellow with matching cable and fitted with a G9 LED bulb is fully adjustable and rotates 360 degrees, this is perfect for the office, bedroom or any room around the home

Created from old motor bike chain that have been welded in to shape and finished in four vibrant colours and mounted on to old engine parts, the vibrant colours help detract  from it's industrial look to give it a wider appeal, fitted with a decorative LED tube bulb and braided cable this would be ideal to add ambient light to any room in the home.

Using the fan blades from an old car heater blower for the shade, the body is from an old axle differential pinion wheel with the centre section of a wine bottle bonded in place with the fan slotting over the top making this a truly individual light, ideal for ambient light anywhere around the home, with braided cable and an LED bulb.

Using an old gear wheel as the base welded to which is machine chain welded in to shape, mounted on to  a turned wooden base and all finished in the Gulf racing colours, fitted with a large decorative LED globe bulb and orange braided cable this is ideal for the car or  motor racing enthusiast for the office/ showroom or man cave.

Created from various reclaimed materials the arms are old slats from a bed frame finished in various colours mounted to an old water pump with the top half of a wine bottle as a shade, fitted with an LED bulb and braided blue cable this light is free to rotate 360 degrees and is fully adjustable by way of thumb turns at each joint. This has been PAT tested and all fittings comply with UK regulations. Perfect as a desk or bedside light or just an occasional light.

Created from reclaimed old braided gas hoses set in a question mark pose mounted on to a wooden base board, the shade is created from an old jam jar with the base cut off that is fitted with a LED G9 bulb and flourescent green braided cable. These have been PAT tested and all fittings comply with UK regulations. These are perfect around the home or office and would make perfect bedside or desk lights.

Created from an old Klaxon horn that has had the internals removed and fitted with a light fitting and mounted on copper pipe with additional copper pipe work for effect, the trumpet has been finished in red with a LED tube bulb. This has been PAT tested and fittings comply with UK regulations. A quirky light for around the home.

Created from three reclaimed pistons from a scrap diesel Honda Civic engine that have been cleaned and welded together with the ring and conrod recesses finished in bright red mounted on to a polished hardwood base, with braided red cable and decorative LED tube bulb, this is perfect for the car enthusiast as a desk or bedside lamp or any room around the home.

Created from reclaimed seat springs from an old garden chair that are welded to a gear cluster set that allows the cage to rotate through 360 degrees, mounted to a polished hardwood base and blue braided cable complete with large decorative LED globe bulb, perfect for the living room or bedroom as ambient lighting.

Created from a pair of reclaimed cobblers shoe irons that have been cleaned of all the loose rust and paint and polished with black wax to bring out the patina, with a piece of reclaimed brass tube to support the light fittings and fitted with flourescent green braided cable and a contemporary 12" black shade, complete with LED bulbs, with one on it's toes (153) and the other on the side (155) they would make a great talking point and would be ideal as bedside lamps. 

Created from a gear cluster from a scrap engine that have been cleaned and drilled for the cable to pass through, with an old coil spring cleaned and finished in bright flourescent blue welded to the top of the cluster mounted to a turned polished hardwood base and blue braided cable, complete with LED bulb and contemporary black shade, ideal for a car enthusiast as the selector rings can still be moved to allow different gears to rotate.

Created using a reclaimed camshaft from a scrap engine and a salvaged Pylon glass insulator, the camshaft having been cleaned and finished in a vibrant green leaving the polished cam lobes, the insulator mounted via the central support spigot and fitted with 2 G9 LED bulbs and flourescent green braided cable, an ideal light for any room in the home. 

Created from a reclaimed camshaft from a scrap engine cleaned and finished in Gulf racing blue leaving the polished lobes complete with it's cam gear finished in Gulf orange with the chain raw, the shade is from an old washing machine electric motor housing welded to the camshaft and an old reclaimed lorry indicator lens mounted on top as an additional feature, fitted with 3 G9 LED bulbs and orange braided cable makes it perfect for a Gulf racing enthusiast.

Created from reclaimed off cuts from an old Indian rustic door frame that have been drilled to allow the fitting into the block so the bulb appears to be coming straight out of the wood, the blocks have been waxed to bring out the patina in the wood and fitted with braided red cable and come complete with decorative large LED bulbs, are ideal for ambient lighting only.